Fichier:Smile payload module’s first taste of flight ESA506845.jpg

    Fichier d’origine (8 256 × 5 504 pixels, taille du fichier : 12,1 Mio, type MIME : image/jpeg)

    Ce fichier et sa description proviennent de Wikimedia Commons.

    Description

    Description
    English: On 21 January 2025, engineers at ESA’s technical heart (ESTEC) connected the two main parts of the Smile spacecraft, putting it into its final flight configuration.
    In this image we see the payload module, which hosts three of the spacecraft’s four science instruments. The payload module is the responsibility of ESA, and was built by Airbus on behalf of ESA.
    An Airbus engineer looks on as his colleague attaches ropes to the payload module. The ropes are part of a hoisting system that carefully lift the module up into the air, move it across the room, and place it on top of the second main part of the spacecraft, the platform.
    When the payload module is finally ready to lift, it rises very slowly, at about a centimetre per second. After all, this is delicate equipment that has taken years of work and is worth millions of euros!
    Find out more about the testing and integration of Smile at ESTEC

    Smile (the Solar wind Magnetosphere Ionosphere Link Explorer) is a 50–50 collaboration between the European Space Agency (ESA) and the Chinese Academy of Sciences (CAS).

    [Image description: A man in protective clothing in a cleanroom. He is looking at a spacecraft covered in bronze foil. Four hooks hang from the ceiling; a second engineer seems to be attaching these hooks to the spacecraft.]
    Date 6 mars 2025 (date de téléversement)
    Source Smile payload module’s first taste of flight
    Auteur ou autrice European Space Agency
    Action
    InfoField
    Integrating
    Activity
    InfoField
    Space Science
    Location
    InfoField
    ESTEC
    Mission
    InfoField
    Smile

    Conditions d’utilisation


    This media was created by the European Space Agency (ESA).
    Where expressly so stated, images or videos are covered by the Creative Commons Attribution-ShareAlike 3.0 IGO (CC BY-SA 3.0 IGO) licence, ESA being an Intergovernmental Organisation (IGO), as defined by the CC BY-SA 3.0 IGO licence. The user is allowed under the terms and conditions of the CC BY-SA 3.0 IGO license to Reproduce, Distribute and Publicly Perform the ESA images and videos released under CC BY-SA 3.0 IGO licence and the Adaptations thereof, without further explicit permission being necessary, for as long as the user complies with the conditions and restrictions set forth in the CC BY-SA 3.0 IGO licence, these including that:
    • the source of the image or video is duly credited (Examples: "Credit: ESA/Rosetta/NavCam – CC BY-SA IGO 3.0", "ESA/DLR/FU Berlin, CC BY-SA IGO 3.0", "ESA/Photographer’s name, CC BY-SA IGO 3.0"), and
    • a direct link to the CC BY-SA 3.0 IGO license text is provided, and
    • if changes were made to the original image or video, there is a clear statement on the Adaptation indicating that changes were made to the original content; Adaptations must be Distributed or Publicly Performed under the Applicable License, as set forth in Article 4b of the CC BY-SA 3.0 IGO licence.

    See the ESA Creative Commons copyright notice (archived from original), the ESA Portal Multimedia Gallery copyright notice for complete information, and this article for additional details.
    w:fr:Creative Commons
    paternité partage à l’identique
    Attribution:
    ESA–A.Conigli, CC BY-SA IGO 3.0
    Vous êtes libre :
    • de partager – de copier, distribuer et transmettre cette œuvre
    • d’adapter – de modifier cette œuvre
    Sous les conditions suivantes :
    • paternité – Vous devez donner les informations appropriées concernant l'auteur, fournir un lien vers la licence et indiquer si des modifications ont été faites. Vous pouvez faire cela par tout moyen raisonnable, mais en aucune façon suggérant que l’auteur vous soutient ou approuve l’utilisation que vous en faites.
    • partage à l’identique – Si vous modifiez, transformez ou vous basez sur cet élément, vous devez distribuer votre contribution sous une license identique ou compatible à celle de l’original.

    Légendes

    Ajoutez en une ligne la description de ce que représente ce fichier
    On 21 January 2025, engineers at ESA’s technical heart (ESTEC) connected the two main parts of the Smile spacecraft, putting it into its final flight configuration.

    Éléments décrits dans ce fichier

    dépeint

    image/jpeg

    5 504 pixel

    8 256 pixel

    12 691 355 octet

    02c2303f5ef0e029c3b2d31cadfd1ae21513ab41

    3eqax5k9742vg0oikw2jkjf8a0f20t9xbw7uqvmdwg3o842l5i

    0,00625 seconde

    81 millimètre

    Historique du fichier

    Cliquer sur une date et heure pour voir le fichier tel qu'il était à ce moment-là.

    Date et heureVignetteDimensionsUtilisateurCommentaire
    actuel7 mars 2025 à 08:01Vignette pour la version du 7 mars 2025 à 08:018 256 × 5 504 (12,1 Mio)OptimusPrimeBot#Spacemedia - Upload of https://www.esa.int/var/esa/storage/images/esa_multimedia/images/2025/03/smile_payload_module_s_first_taste_of_flight/26594381-1-eng-GB/Smile_payload_module_s_first_taste_of_flight.jpg via Commons:Spacemedia

    La page suivante utilise ce fichier :

    Métadonnées